Sentence examples for by selective etching of from inspiring English sources

These problems can be resolved by selective etching of the coated material on the tip end.

The vertical PPy nanotube arrays of different tube diameter are created by selective etching of the ZnO nanorod core in ammonia solution for different periods.

The nanoporous p-type NiO films were successfully obtained by simultaneous deposition of Al and Ni, followed by selective etching of Al and oxidation.

In this study, the effect of hydrogen on the structure and mechanical properties of carbon films produced by selective etching of monolithic SiC was examined.

These nanostructures are formed by depositing a sheath of PPy over vertical ZnO nanorod arrays by controlled pulsed current electropolymerization and by selective etching of the ZnO nanorod core.

(a) PAN/silica composites with a mixing ratio of 2 1, (b) carbon/silica prepared by carbonization process, (c) macroporous carbon membranes obtained by selective etching of silica, and (d) Raman spectrum of the porous carbon material showing an amorphous carbon structure (ID/IG = 2.2).

The device was fabricated by selective etching to have a p-channel of length 0.6 mm and an n-channel of length 1 mm.

As a result, nanocaves appeared on the center portion of the TiO2 nanorods by hydrothermal selective etching of the core and the remaining sidewall of (110) face, which can be obviously detected from the inset of Fig. 1b.

The formation of self-assembled ITO-based nanodots by wet etching of the as-deposited ITO films can be explained by the formation of a small crystalline ITO phase imbedded in a metallic amorphous matrix in the as-deposited ITO films, followed by the selective etching of a metallic amorphous matrix during wet etching [14].

It is found that the height of the hillock produced by selective etching increases with the etching temperature before the collapse of the hillock.

Herein, a sandwich-like three dimensional conductive network of MoS2 intercalated p-Ti3C2 (partially oxidized Ti3C2) is fabricated by selective etching and subsequent hydrothermal treatment to overcome the shortcomings of Ti3C2.