FEM calculations for the neutron wall loading of 1.5 MW/m2 show that the temperature of the STB armor tile can be kept below 2000 K by optimizing the first metal wall thickness.
The aim of the study is to develop zircon-free, frit-based, glossy opaque glass ceramic glazes for wall tiles by optimizing the CaO/MgO and adjusting the Al2O3/alkali ratios in the starting frit compositions.
Energy savings in buildings can be achieved to a large amount by optimizing the insulation capabilities of its external walls.
The results showed that the emission at the exit and the wall deposition of cut tobacco was significantly reduced by optimizing the pressure distribution in the exhaust hood.
DWCs were firstly designed for each case by optimizing the vapor split to the two sides of the dividing wall, and then their feasibilities and total annual costs in operation were evaluated against different vapor split ratios.
By optimizing the ratio of the materials, the final strength of the backfilling wall achieves at least 30 MPa.
The magnetic HCs with uniform wall thickness were easily synthesized on cellulose fibers (CFs) surface via two depositions, and the morphology of the hollow metal coatings can be controlled by optimizing the experiment conditions.
This problem was solved by optimizing the synthesis of ZnO.
These parameters have been estimated by optimizing the prediction process.
Effectiveness may be improved by optimizing the design of interventions.
