The amplitude for is converted into that at the equator by multiplying a provisional correction factor although its latitude dependence cannot be exactly expressed by cos γ as it contains the north-south asymmetric term (sin γ).
Differences in the number of shifts and daily working hours in the different calendar years were accounted for by multiplying with a correction factor.
Correction was made in ∼50% by multiplying A1C with a correction factor (mean of reference values for the standard assay divided by mean of the reference values for the given assay).
Comparing the results of OAWCF for field sizes of 15 × 15 and 10 × 10 cm2 (Figures 2 and 3) with CFf.s for a 15 × 15-cm2 field size (Figure 4) under 6-MV photon irradiation, it can be deduced that an OAWCF at a non-reference field size is approximated by multiplying the given correction factor at a reference field size by the corresponding correction factor at a non-reference field size.
Hence, we recommend to Construction Engineers to estimate the residual flexural strength of RC beams by multiplying the correction factor, C f, predicted by ANN, with the theoretical moment capacity, ( M_{th,c} ).
The average number of cells per scan was expressed as cells per linear cm of intestine by multiplying by 30.3, a correction factor determined from the field width of 330 mm, as previously described [ 22].
In SD-OCT, the sensitivity of the system decreases as a function of depth due to the finite resolution of the spectrometer and because of this, we applied a depth-correction function, reported by Yun et al. [ 24], during image processing by multiplying each A-line by the calculated correction curve.
By multiplying the compaction correction degree parameters in the map by the thicknesses in the depth domain, a plan map of compaction recovered thicknesses eventually can be obtained.
Lung tissue extract cytokine concentrations were standardized in the following way: the absorbance at 280 nm was determined for each sample and used to normalize each sample value individually by multiplying with the correction factor: [A280 (mean, all samples)]/[A280 (sample)].
The NH3 readings by MGM (mg/l) were multiplied by a correction factor for the atmospheric pressure.
