Sentence examples for by modifying the configuration from inspiring English sources

It's used as the reference data set for numerical simulations that were run on a 2-dimensional domain by modifying the configuration settings of angles for an adjustable baffle (i.e., 30°, 45°, and 60°) and without one.

To intensify the air scouring efficiency and reduce the membrane fouling, a new folded plate membrane module (FPMM) was designed by modifying the configuration of conventional flat sheet membrane module (FSMM).

However, the reduction in stiffness induced by modifying the configuration under the ballast (by, for example, adding elastic mats) causes an increase in settlement, the latter exerting the strongest influence (even more so than the change in ballast thickness) on track performance.

The reactor efficiency can be improved by modifying the outlet configuration to minimize the recirculation.

The dynamics zones can be altered by modifying the geometric configuration of the reactor and the impeller stirring mechanism.

The impact of these two phenomena on the performances during cycling and after prolonged storage of accumulators is evaluated by modifying the cell configuration.

The migration of nitrite to the rebar is promoted during the application of an ECE treatment by modifying the classical configuration through the connection of an external cathode to the rebar.

Nevertheless, by modifying the adapter configuration file it is possible for an administrator to enable/disable tests or set/unset options.

This can either be done directly from the web interface or by modifying the databank configuration file manually.

End-users, particularly healthcare providers, insisted on detecting adverse outcomes that are clinically relevant (e.g. worsening of a pre-existing condition directly caused by the new WC) and could be ameliorable following a screening intervention (e.g. resolved by modifying the WC configuration).

Different system configurations were generated by modifying the base case configuration through an organized procedure and were optimized separately following the objective of maximum roundtrip efficiency only, as done for the base case in part A. The optimization results of the new configurations are discussed and compared with the base case scenario.