Sentence examples for by increasing the input from inspiring English sources

Hence, the increase in the growth rate of the wire by increasing the input current and substrate temperature and the decrease in the wire diameter favor wire straightness.

The bubble size decreased by increasing the input voltage to the filter; the average diameter changed from 60 to under 10 μm when the input voltage changed from 0 to 200 V.

The diffusivity of hydrogen in the oxide is found to increase with increasing hydrogen content in the oxide produced either by increasing the input concentration of hydrogen or by decreasing the passivating potential.

Calculation results show that the Raman DTS system, which used the proposed PCF as the sensing fiber, can improve SNR about 3.4 times by increasing the input power compared with the Raman DTS system with a conventional single-mode fiber, because of the improved LMA, single-mode operation and good bending characteristics of the PCF.

Next, from the torque-balance perspective, we show how swimming behaviors of our microswimmer varied by increasing the input frequency.

By increasing the input current gradually, the current that triggers the subsequent melting of the mesh segment can be determined.

The other big component of economic growth is how much output is raised by increasing the inputs — adding more capital or workers — what economists call factor accumulation.

In effect, economic growth has been generated by increasing the inputs (hours worked) rather than increasing the efficiency with which those inputs are used.

However, from Fig. 6, the BER curves for NRZ-OOK modulation format for different values of input power show that by increasing the transmitter input power, the effect of dispersion could be reduced and therefore it would be possible to achieve longer propagation distance with significant lower BER.

Most importantly, a <001> fibre-texture along the build direction can be changed into a cube-texture when the qualitative shape of the melt-pool is altered (from shallow to deep) by increasing the energy input of the scanning laser.

However, by increasing the transmitter input power, the effect of dispersion could be reduced.