Your English writing platform
Discover LudwigSuggestions(5)
Exact(9)
By increasing the fiber length gain ripple increases to 0.5 dB for 0.1 mW input signal power.
The antibacterial efficacy reached about 92.4% in the membrane module with only 10 PE PDMAE-BC fibers and can be further imPE PDMAE-BCncreasing the fiberspanding density.
Test results indicated that the static flexural performance, including the flexural strength and toughness, were improved by increasing the fiber aspect ratio or through the use of twisted steel fibers.
By increasing the fiber aspect ratio and volume fraction, both the energy absorption capacities and the equivalent strengths were improved.
This agreement supports our proposal to improve the Raman forward scattering at the expense of Brillouin scattering by increasing the fiber length.
By increasing the fiber aspect ratio from 65to8080, the hooked steel fiber volume content could be reduced by 0.25% without any significant deterioration of energy absorption capacity.
Similar(51)
The degree of alignment and density can be increased simultaneously by increasing the fiber-winding rate, which is a basic precept for the processing of commercial polymer fiber.
The effective thermal conductivity of the fiber-loaded aerogel can be reduced by reducing the fiber length-to-diameter ratio and the inclination angle and by moderately increasing the fiber volume fraction.
The models show that by increasing the embedded fiber length, interface failure temperatures can be increased so that zero CTE behaviors can be utilized without irreversibly changing the NiTi prestrain.
Finally, while the 100 μm fiber resulted in a largest SNR's both with and without the hemisphere, the relative improvement was not as significant as that seen by increasing the detection fiber size from 8 μm to 50 μm.
Increasing the fiber level by increasing the amount of CST in the diet resulted in a linear decrease of DMD and organic matter digestibility.
More suggestions(16)
by increasing the cf
by increasing the fibres
by increasing the liquidity
by increasing the power
by increasing the minimum
by poking the fiber
by increasing the number
by controlling the fiber
by fixing the fiber
by increasing the supply
by increasing the dispersant
by increasing the dominance
by adjusting the fiber
by increasing the germanium
by increasing the bedroom
by increasing the release
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com