The length of the lumen, L. Finally, the mean inlet flow rate U can be controlled by fixing the volumetric flow rate on the pump used to deliver fluid to the bioreactor.
However, to make the problem computationally feasible it was necessary to reduce the CHT predictions by fixing the external flow and solving the task for the interior only (solid and coolant).
In the second and third steps, by fixing the common non-reactive flow and transport parameters, the sorption parameters (retardation factor, sorption coefficient, and kinetic rate constant) of each model are estimated using the breakthrough data of reactive tracers, neptunium and uranium, respectively.
In phase II, the chemical reaction rate as well as the InAs coverage keeps increasing due to the increasing AsH3 partial pressure, but the increase of the growth rate is limited by the fixed TMIn flow rate.
Following surface staining of thymocytes as above, BrdU was detected following the BrdU Flow Kit (BD) protocol by fixing and permeabilizing cells with provided buffers, incubating for 1 hr at 37°C in DNase, then washing and staining with anti-BrdU antibody.
Once the leak was fixed, the samogon started flowing.
The bacterial abundance was calculated by multiplying the acquisition rates (between 160 and 640 bacteria counted per sec) by the flow rate (fixed to 60 µl min−1).
Results indicated that, for the same area occupied by the ducts and fixed mass flow rate of air, the increase of the number of ducts (complexity of geometry) improved the EAHE thermal performance up to approximately 73% for cooling and 115% for heating.
The temperature of the flue gases after the air heater is fixed at 150°C and is maintained by varying the flow through the steam cycle.
