Sentence examples for by fitting the analytical from inspiring English sources

The dispersion coefficient was calculated by fitting the analytical solution of FADE to the measured data at different transport scales.

The critical buckling load of the panels was evaluated by fitting the analytical expression by non-linear regression to experimentally measured load displacement curves.

The parameters derived by fitting the analytical model to the computed response are then used in the prediction of the gain function.

The model is based on the numerical solution of the coupled one-dimensional heat and mass transport equations, assuming moisture transport due to Fick's diffusion, with an effective moisture diffusion coefficient derived by fitting the analytical solution of the Fick's law to experimentally derived drying curves, on the basis of an Arrhenius-type temperature dependence.

The spatial resolution of the imaged sphere was then determined by least squares fitting the analytical profile formula F r --resulting F r --resultingn oF r --resultingGaussian point spread fromtion with a homogeneous sphere--to the measured radial profile data A(r n ).

The voxel-by-voxel analysis of the Fmiso TACs was done by fitting the five-parameter analytical model function for the tracer concentration in the tissue compartments to the measured Fmiso curves.

In the case of MA-XRF mapping, the hyperspectral data cube is typically processed by fitting the XRF spectra to an analytical model to obtain elemental maps [18].

For each interstitial velocity, a corresponding time invariant overall mass transfer coefficient was determined by fitting the experimental data to an analytical solution applicable to nonaqueous phase liquid (NAPL) pools (Water Resour. Res. 31(4) (1995 11377).

Generally those parameters are being assessed by fitting the intensity data to an analytical or numerical model of photon migration, with prior assumptions being made.

The GDD was calculated using an analytical approach by fitting the optical constants of the coating materials in the wavelength range of 12.8 17.2 nm, respectively.

This finding is demonstrated by fitting the 3D simulated data on the short timescale, to the analytical expressions for 2D diffusion and/or exchange (Figure 3B).