Sentence examples for by dimensional analysis to from inspiring English sources

These results are analyzed by dimensional analysis to correlate the friction coefficient with sliding velocity, frequency and amplitude of vibration.

The geometric parameters and the rotational speed of the test rig were determined by dimensional analysis, to ensure the flow characteristic remains unchanged as compared with commercial AFPM generators.

The wear rate (mm3/m) calculated for each load and sliding speed combination was used to state the dimensional equation in terms of wear rate parameter, interface parameter (X) and thermal parameter (Y) defined by dimensional analysis approach to quantify the influence of interactive tribological and materials parameters on the wear system under study.

A simple scaling law to quantitatively correlate the droplet size and process variables was developed by dimensional analysis and used to predict the diameter of particles produced under a given set of conditions.

For any given problem, the results provided by dimensional analysis turn out to be both useful and correct.

In this work, two new indices, SE and SG are proposed to evaluate pitting corrosion by dimensional analysis of three parameters of PSD, the slope of high frequency linear region (k), the critical frequency (fc) and the low-frequency plateau level (W).

For the first group, the crack growth curves strongly focus at 10 MPa m1/2, whereas the Paris exponents vary considerably and are related to a material parameter obtained by dimensional analysis.

Ebtehaj et al. (2014) presented a regression-based equation to determine the densimetric Froude number (Fr) by dimensional analysis with a wide range of data as follows: Fr = frac{V}{{sqrt {g (s - 1 )d} }} = 4. 4 9;C_{V}^{ 0. 2 1} left( {frac{d}{R}} right)^{ - 0. 5 4}.

The '96 exam tends to have more order of magnitude estimation and the '86 exam tends to have more questions that can be eliminated by dimensional analysis.

The equivalence of measurement of energy per unit area to force per unit length can be proven by dimensional analysis.

They can be simplified by dimensional analysis.