Sentence examples for by decreasing the maximum from inspiring English sources

The fracture ESO algorithm considerably improves the residual strength by decreasing the maximum stress intensity factor.

A practical Ship Inner Shell Optimization Method (SISOM), the purpose of which is to improve the safety of the seagoing transport ship by decreasing the maximum Still Water Bending Moment (SWBM) of the hull girder under all typical loading conditions, is presented in this paper.

However, by decreasing the maximum activation and proliferation rate of Treg (α R) and without changing the production or activation rate of self-reacting resting T-cells, immune homeostasis was lost and spontaneous immune responses emerged in the absence of infectious agents, mimicking the relapsing dynamics of autoimmune diseases.

Each adjustment shall be made by increasing or decreasing the maximum deficit amounts set forth in section 665 1 of this title.

However, ETZ increased the maximum CO2 peak area by four-fold, whereas decreasing the maximum HCO3− peak area by two-fold (Table  1, P < 0.001).

For example, decreasing the maximum crack size by 4.4% and increasing the lowest fracture threshold by 2.8% results in the reduction of probability of failure by 40%.

This can be done by decreasing the value of the maximum allowed distance of a switch while maintaining the same optimal total cost.

By decreasing the compression ratio of the hump, the maximum water velocity within the system decreased by 45%, while the maximum values of shear and vorticity decreased by 18% and 23%, respectively.

Increasing the fluid viscosity by 35% decreases the maximum fetal removal force by up to 52.5%.

In 2008, Wrishko et al showed that coadministration of tadalafil with bosentan, a P450 inducer, for 10 days in 14 healthy subjects decreased tadalafil exposure as measured by area under the curve (AUC) by 41.5% as well as decreased the maximum plasma concentration (Cmax) by 26.6%.

Increasing curvature and thickness of the sample were found to decrease the focusing of the beam: typically, a curvature of 0.05 mm−1 decreased the maximum pressure by 45% and doubled the focal area.