Sentence examples for by controlling the oxygen from inspiring English sources

PMR can improve the selectivity and yield by controlling the oxygen feed to the catalyst bed through manipulating the feed pressure.

We find that the stability of the perovskite phase at high temperature is governed, as expected, by the magnitude of tolerance factor (t⩽1) which can be adjusted by controlling the oxygen content 3−δ.

It was revealed that the adhesion strength and the electrochemical behaviors of thin films were comparable to those of the bulk steel by controlling the oxygen level in the films during the deposition process.

Given the model structure is correct, high TN removal (>70%) with a relative low NO and N2O production (<1.0% of TN removed) in an MABR can be achieved by controlling the oxygen and ammonium surface loading at 2.0 g m−2 dand1.0nd 1.0 g m−2 day−1, respectively.

The resistivity can reduce the forming current by controlling the oxygen content of TaO x [120].

The surface reactivity and toxicity may also be varied by controlling the oxygen vacancy in zinc oxide tetrapods.

By controlling the local oxygen vacancies concentration, the LSMO-based microbridges were reversibly switched from metallic to insulating behavior on timescales lower than 1 s and with small applied voltages (<5 V).

"By controlling the way the oxygen is bonded to the graphene sheet, we can use chemical and thermal energy to drill the holes with the help of the oxygen," Grossman says.

The control of the oxygen-to-methane ratio by the air flow to the air-reactor was preferred against controlling the oxygen transferred by the solids circulation rate because a lower excess of air was needed in the first case to reach auto-thermal conditions.

The switching mechanism is the formation/oxidation of oxygen vacancies in a conducting filament by controlling the migration of oxygen ions through the electrically formed interfacial layer.

As the device resistance in the interfacial mode is mediated by the level of oxygen ions in the ZrO2 − x layer, multiply resistance states can be achieved by controlling the amount of oxygen ions in the middle layer using different RESET voltages.