Sentence examples for by considering the equivalent from inspiring English sources

Strategies for the suppression of plate vibration are investigated by considering the equivalent impedance of power-minimising vibration controllers.

However, the main results of this paper are still applicable when the same subcarriers are allocated to the user during all HARQ retransmissions by considering the equivalent channel response seen by the user's carriers.

The steel fiber contribution in the tensile zone after cracking needs to be considered in the structural design, and the compressive and tensile stress blocks in the cross-section should be considered based on the proposed material stress strain models (Fig. 16) by considering the equivalent specific length for tension.

We prove the existence of a solution to problem (1.1) by considering the equivalent operator equation mathcal{P}x t)+mathcal{Q}x t)=x t), where begin{aligned} &mathcal{Q}x t) = x_{0}-f(t_{0},x_{0})+ int_{t_{0}}^{t}frac{ t-s)^{t}frac{ t-samma(alpha)}g bigl(s,x(s) bigr),ds, &mathcal{P}x(t) = f bigl(t,x(t) bigr), end{aligned} for (tin J).

This speedup should be put into perspective by considering the equivalent performance figure for the naive solution as presented in Table 5 where a mere 97x speedup is achieved on the same setup.

Mesh size effects have been particularly studied and analyzed, not only on residual stress computation, which has been always dealt with, but also by considering the accumulated equivalent plastic strain (PEEQ).

By considering the PKA equivalent position of a residue, we can identify and analyze interactions concerning residues in structural and sequence motifs across the kinome.

We apply the shift argument of [1] (a similar idea has been used in [14, 36]), by fixing ω ∈ R ∖ { 0 } and considering the equivalent expression (5.3).

We estimated the minimal important difference (MID) following as recommended by Sloan and Norman by considering the MID as equivalent to half of a standard deviation for each measure [ 18].

An optimisation method by considering the winding loss and equivalent circuit is used to investigate the situation of the minimisation of the total loss of the magnetic coils.

For more complex radar configurations, such as overlapping uniform linear subarrays [18], distorted linear and bistatic arrays [19], arbitrary arrays [20], and sparse arrays [21], clutter DOFs are achieved by considering the space time clutter as an equivalent time-limited sampling of a spatial-frequency band-limited random process.