Sentence examples for by a thin copper from inspiring English sources

The new RFX load assembly characterized by a thin copper shell requires using an active control system for the plasma equilibrium.

The RFX new load assembly is characterized by a thin copper shell with a 50 ms time constant for the penetration of the vertical magnetic field.

The new RFX load assembly is characterized by a thin copper shell with a 50 ms time constant, for the vertical field penetration, and 192 active saddle coils all around the torus.

A radiation shower is induced by a thin copper scatterer placed at the entrance of the FOE, followed by a second silicon scatterer which is set in the middle of the FOE.

Dr Wood's flies are similarly computer-controlled and this, for the moment, is where the illusion breaks down, becomputer-controlled andn a deskthisand is connected to the robot by a thin copper wire.That could be fored withea suitable chip.

The design and implementation of a real-time control system of the plasma equilibrium was required in RFX-mod, the load assembly of the machine being characterized by a thin copper shell to prevent the growth of MHD resistive wall modes with a time constant much shorter than the typical pulse length.

We transferred SiNWs from the original substrate to a square area delimited by the ends of Nb paths of the probe circuit by using a thin copper wire (diameter = 0.1 mm) as scratch tool.

By introducing a thin copper strip in the workpiece and welding through it, thus, acting as a marker material, detailed information about the flow field is gathered.

The particles were manually pushed towards the orifice position one by one using a thin copper wire and were dropped from the orifice with small initial velocity; it took approximately 20 seconds to complete the translation of the particles set in the sample-holder (~30 particles).

Here we presented a floor tracking system using a large-area single-electrode triboelectric nanogenerator by simply coupling commercial polyvinyl chloride (PVC) flooring with a thin copper film.

In this study, the effect of oxygen content on a thin copper oxide layer deposited on BK7 and steel substrates by DC magnetron sputtering were investigated.