Sentence examples for by a surface resistivity from inspiring English sources

This is characterized by a surface resistivity less than 30 Ωm from the VLF-MT survey (Kagiyama et al. [2010]).

The optimized CNT network demonstrated a surface resistivity of 205 ohm/square with 65% optical transmittance.

Surface resistivity was measured on a surface resistivity meter, which was our homemade equipment and calibrated against indium tin oxide on PET as reference samples.

The coatings were thin, macroscopically flexible and exhibited a surface resistivity in between 10 150 Ω/square.

Omission of the binder resulted in a surface resistivity one order of magnitude less, of 12.3 Ω/square, but the surface resistivity of these samples increased more upon abrasion than the samples coated with binder.

Conductivity of the obtained films was evaluated by surface resistivity measurements by means of a standard two-point micro-contact method before and after iodine doping.

Their electrostatic dissipating properties, probed by measuring surface resistivity, were correlated with the chemical functionalities.

The effect of Gr loading into CS on electrical resistivity properties of CS was determined by surface resistivity measurements.

Finally, we observed that the polymer-wrapped CNTs revealed a lower surface resistivity.

The result is that we can obtain a lower surface resistivity for the good dispersion of CNTs in composites.

It was apparent that the polymer-wrapped CNTs can offer a lower surface resistivity than the raw CNTs.