Sentence examples for by a parallel plate from inspiring English sources

Finally, rheological measurements were carried out by a parallel plate rheometer stress tech HR at 200°C.

The permeability of the fracture can be expressed by a parallel plate concept (cubic law) as shown in Eq. (6).

The stability of bFGF immobilized on PLGA film via CO2 plasma treatment was tested further under dynamic conditions by a Parallel Plate Flow Chamber.

The stability of rhBMP-2 bound on OT-PLGA film was determined under a dynamic condition by a Parallel Plate Flow Chamber.

For ribbon devices, the geometry is not well approximated by a parallel plate capacitor, so the gate capacitance was calculated numerically.For the device in Figure 5, the capacitance was calculated to be 47.5 nF/cm2 using a numerical calculation based on the finite element method.

By a parallel plate-based screening strategy, three mutants with improved S/H ratio, R87L, T132N and N219I, were obtained.

Subsequently, cells were seeded onto NH3 modified surface and exposed to 29.5 N/m2 of shear stress field by means of a parallel plate flow chamber in order to get good insight into the influence of N-containing incorporation on cell retention, cell morphology, and cell shape factor.

Al powder with nominal particle sizes in the range of 4.5 7 μm is aerosolized using a parallel plate capacitor by charging particles contacting the electrodes.

Nickel alumina nanocomposites were produced by electrocodeposition utilizing two electrode configurations, a parallel plate electrode (PPE) and impinging jet electrode (IJE), and various current modulations, i.e. direct current (DC), pulse plating (PP) and pulse reverse plating (PRP).

Superconducting parallel plate resonator (PPR), a parallel plate capacitor structure with two superconducting films back to back and a dielectric spacer between them was first introduced by Taber [15] to measure the RF surface resistance of superconductor films.

Self-assembled monolayers (SAMs) on glass slides with functional groups of OH, CH3, and NH2 were employed to provide various material chemistries, while FSS (12 dynes/cm2) was produced by a parallel-plate fluid flow system.