Sentence examples for bus signals from inspiring English sources
Differential Encoding - Because electrical lines are susceptible to noise, bus signals are often differentially encoded.
A backplane provides the data, address, and control bus signals, and various cards can be plugged into the bus to configure the system as required.
The measured and ACCURATE model data match, mainly regarding to bus signals voltage slope.
A bus signal uses the resolution function to determine the signal value by passing it an empty array.
This chapter introduces the components and terminology used to describe the communication architectures and covers some of their major characteristics, such as bus signal types, physical structure, clocking, decoding, and arbitration.
Figure 7 shows the bus signal integrity verification.
DC bus signaling (DBS) and adaptive adjustment of droop gain are the most common type of decentralized control [15].
Figure 10 shows the bus signal integrity analysis not just for the typical behavior but also for the corner cases (best and worst cases).
A typical example of distributed control scheme is DC bus signaling (DBS) method [25, 26, 27], in which the bus voltage is regarded as global indicator to determine the operational modes of converters according to the defined voltage thresholds.
A DC bus signal of (395,text {V}) is provided at (t=0,text {s}) in the control logic, PV at this moment operates at BVR (Fig. 7) and battery is charged with manufacturer's charging current reference.
Test case description Behavioral model Spectre model Simulation period Bus signal integrity 3.8 s 372.8 s 102 s Bus state transitions 3.5 s 512.2 s 400 s Vcc Power supply failure 2.5 s 162.9 s 120 s Wake-up pattern detection 7.8 s 2622.8 s 235 s.
