Sentence examples for bus measurements from inspiring English sources

In-situ measurements were performed with a datalogger during temperature cycling, accompanied with 1149.4 mixed-signal test bus measurements of corner interconnections performed between cycling intervals.

A convenience sample of children < 21 years-old who were admitted to the pediatric critical care unit and required CVP monitoring had BUS measurements of both IVC and aortic diameters with simultaneous CVP measurement.

Our study sought to determine if bedside ultrasound (BUS) measurements of the IVC diameter correlate with central venous pressure (CVP) measurements as an indicator of intravascular volume status in acutely ill children.

Table 2 Results of case studies, power system contingencies without and with fault conditions, conducted on WSCC-9 bus system Power System Condition Bus number where MPMU is installed Connected branches with MPMU installed bus Measurements of phasor currents from MPMU connected branch Is fault detected?

Because of the high availability requirements from weapon equipment, an in-depth study has been conducted on the real-time fault-tolerance of the widely applied Compact PCI (CPCI) bus measurement and control system.

The premise is that power flow calculation is not required for vulnerability estimation, requiring only the bus voltage measurements; the approach is a promising tool for on-line implementation.

Depending on the location of available voltage measurements, the bus powers of the corresponding branches are adjusted iteratively to better fit the measured voltage.

For the sake of a simpler presentation of the algorithms in this paper only a balanced network is considered, and it is assumed that each bus has all required measurements available.

The maximum percentage measurement errors have been assumed as: 1.5% (bus voltage and branch current magnitude measurements), 3% (power flow measurements) and 50% (pseudo-measurements for loads and DGs connecting to ADNs directly).

We generate realistic mobility scenarios by employing the measurements of real bus traces.

At the same time, an auxiliary measurement vector is defined as {tilde{varvec{z}}} = { U_{i},P_{ij},Q_{ij},P_{i},Q_{i},I_{ij}^{2} } (5 where ( {tilde{varvec{z}}} in R^{m} ) is the auxiliary measurement vector; P ij and Q ij the power flow measurements of branch ij (from bus i to bus j); and ( I_{ij}^{2} ) the square of current magnitude of branch ij (from bus i to bus j).