Sentence examples for burning surface from inspiring English sources

From a performance standpoint, they should burn inward at the burning surface in a consistent and predictable manner that is not unduly sensitive to pressure or bulk temperature at a rate typically in the range of 0.2 20 cm (0.08 7.8 inches)per second.

By comparing the difference of characteristics between the burned and unburned zone, the result shows that coke deposition occurs under the burning surface, where the coke deposition zone is.

In the 1850s Thomas J. Rodman of the U.S. Army developed black powder grains so shaped that they provided a progressively greater burning surface as the combustion progressed, with a resulting maximum energy release after the projectile had already begun to travel down the bore of the gun.

Simultaneously, the emergence of the thermocouple from the burning surface was determined with a video camera.

Temperature profiles near the burning surface were measured with a thermocouple embedded in the specimen.

Thus, the burning surface of AN did not regress simultaneously with the burning surface of the AP-filled region, the matrix of AP, and HTPB.

The burning surface temperature of PMMA was measured for both end-burning and sandwich-burning experimental devices.

The burning surface temperature obtained in the present study was found to be almost independent of the regression rate.

The burning rate of rocket motors running with solid propellant is called flame regression, which occurs with the ignition in the fuel grain perpendicular to the burning surface.

Results show that the non-dimensional leading edge and half-burning surface turbulent burning velocities increased with increasing non-dimensional longitudinal integral length scale.

Results show that the half-burning surface turbulent burning velocity normalized by the bulk flow velocity decreased as the normalized characteristic flame height increased.