Sentence examples for burner conditions from inspiring English sources

Results indicate that FDs of this air boundary are in the range of 1.10 1.30 depending on burner conditions.

Soot filtration efficiencies of uncatalytic and catalytic traps were comparable and depended on the burner operating conditions.

Silane (SiH4) was added to hydrogen/oxygen/argon (H2/O2/Ar) flames to produce SiO2 nanoparticles at various burner operating conditions (φ = 0.47 2.16).

The maximum primary size in 0-g is found to be by 40% larger than in 1-g, under the same burner exit conditions.

The measured peak soot volume fractions show a complex dependence on burner exit conditions, and decrease in a nonlinear fashion with decreasing characteristic flow residence times.

Most of the published works in the field of analysis of burners operating conditions are related to jet burners and are limited to initial region of the flame at the outlet of the burner.

Measurements were performed in non-stretched flames, stabilized on a perforated plate burner at adiabatic conditions.

Measurements were performed in non-stretched flames, stabilized on a perforated plate burner under adiabatic conditions.

An approximate transient model is employed to evaluate the BRE burner in microgravity conditions.

This experimental approach facilitates study of the non-linear response of the burner/flame sub-system to feedback of different frequencies and direct measurement of the acoustic impedance of the burner under operational conditions.

Measurements were performed using the heat flux method in non-stretched flames, stabilised on a perforated plate burner at adiabatic conditions.