Sentence examples for burner characteristics from inspiring English sources

Table 4 Boiler and burner characteristics   Description/value Boiler model - AR/25GT (ROCA)  Boiler type Cast iron  Heating capacity 26.7 kW  Water capacity 26 l  Approximate weight 210 kg  Maximum working temperature 110°C Burner model KADET-TRONIC (ROCA)  Nozzle 0.5 GPH  Angle 60°  Pump pressure 8 to 16 bars  Flow fuel 1.86 kg/h  Air regulation 0 to 10 m3/h.

Prior to LDA measurements, burner stability characteristics were determined in terms of gas flow rate and pipe rotation speed.

Based on this model, the present work shows thatτ="Re[2jtanh−1(2δω+(1−N jω2−jω022δω+(1−N)jω2−jω02)]+2πKω, i.e., there is a relation between oscillation frequency, burner acoustic characteristics (ω0,δ), and time delay τ, not explicitly dependent on N, the flame-flow normalized interaction coefficient [D. Durox, T. Schuller, S. Candel, Proc. Combust. Inst.

Since flame modes, lift-off and stability are of much practical importance in the design of burners, these characteristics of the jet flames in a cross-flow at normal temperatures have been studied.

Effects of the primary air (PA), firing rate (FR) on the flame stabilization, temperature profiles within the burner, and emission characteristics are investigated.

Present work also provides an investigation of the influence of number of tripped burners on the characteristics of the flow and thermal fields.

Enhancement of evaporation and combustion are evaluated through the measured thermal structures in terms of temperature distribution along the burner length and emission characteristics at the burner exit.

The validated model is used to study the impact of two different burner concepts on gasification characteristics.

The effects of structural parameters of the burner on angle deflecting characteristics of the damper and that of the jet are experimentally investigated.

We inferred ventilation rates, occupancy patterns, and burner use from household characteristics.

It allows to formulate an optimization criterion for the acoustic characteristics of burners or flames without regard of the boundary conditions offered by combustor or plenum.