Sentence examples for bulk resistivity of a from inspiring English sources

A single Au NW showed a resistance of 52 Ω and resistivity of 2.08 × 10 8 Ωm, which is slightly smaller than the bulk resistivity of a perfect gold lattice of 2.21 × 10 8 Ωm.

The experimental results showed that the bulk resistivity of all specimens increased with the crack propagation, and the increase ratio in inelastic phase was much higher than that in elastic phase.

Using Archie's Law, previous studies suggest that a bulk resistivity of 10 Ωm require a melt fraction of 4 9%, while 3 Ωm requires a melt fraction of 10 23% (Le Pape et al. 2015; Rippe and Unsworth 2010).

A bulk resistivity of 3 Ω-m requires a melt fraction of ~ 5 14% (Unsworth et al. 2005).

With the same amount of yttria, a fully dense AZO ceramic (99.98% of TD) with a grain size of 2.2 μm and a bulk resistivity of 4.6 × 10−3 Ω·cm can be achieved.

Using the same amount of yttria, a fully dense AZO ceramic (99.98% of theoretical density) with a grain size of 2.2 μm and a bulk resistivity of 4.6 × 10−3 Ω·cm can be achieved.

The conductance of the mid- to lower crust north of the YZS corresponds to a bulk resistivity of 1 8 Ωm.

Using this process, it is possible to fabricate flexible TCO films that have an average transmittance of 90% in the visible region and a bulk resistivity of 5 × 10−5 Ω-cm.

Using this process, it is possible to fabricate flexible TCO films that have an average transmittance of 90% in the visible region and a bulk resistivity of 5 × 10−5 Ω-cm.  .

By designing the optical thickness of each ZnO layer and controlling process parameters such as IAD power when fabricating dielectric-metal-dielectric films at room temperature, we can obtain an average transmittance of 90% in the visible region and a bulk resistivity of 5 × 10−5 Ω-cm.

A technique to adjust the bulk resistivity of the laminates within the range of 109 1013 Ω cm is developed.