Sentence examples for bulk decomposition rate from inspiring English sources

Thus, the limiting temperature of pyrolysis of PMMA is about 500°C before the deconsolidation rate of the pyrolysis products begins to take control from the bulk decomposition rate in determining the rate of product evolution.

Basically, the difference between the two systems is an increased decomposition capacity (i.e. the decomposition coefficient, k) in the faunated system and thus a decreased total pool of reactive organic carbon at steady state compared with a defaunated system (Fig. 12), while the bulk decomposition rate and flux are similar at both sites (see A. marina under in situ conditions in Table 3).

The bulk decomposition rate within the sediment is assumed to be first-order with respect to the reactive organic carbon content: dG/dt = k G, where k is the first-order decomposition coefficient (decomposition capacity) and G is the inventory of reactive organic carbon.

The decomposition rate was affected by the mass of solids in the suspension.

Decomposition Rate for Trash".

Thus, the required decomposition temperature increases and the decomposition rate of CuAl2O4 decreases.

Stand fertility correlated positively to the decomposition rate.

Therefore, their decomposition rate in natural water is low.

These bulking agents are used to adjust moisture content and maintain inter-particle void dispersion, which provides adequate air and water exchange within the composting mass (Eftoda and McCartney 2004; Petric and Selimbasic 2008; Iqbal et al. 2010), and also provides optimal initial carbon-to-nitrogen (C/N) ratio to enhance the decomposition rate (Kalamdhad and Kazmi 2009).

The decomposition rate of BPO speeds up with temperature increases.

In contrast, the temperature and the gas flow rate strongly affected the methane decomposition rate.