Sentence examples for buffer solution was used from inspiring English sources

A standard Ferrozine/acetate buffer solution was used as a blank.

No buffer solution was used because the buffer ions could potentially reduce the water absorption capacity of the SAP.

After compaction, 1 mg/ml trypsin concentration at pH 7 and with a phosphate buffer solution was used as ultrafiltration solution.

The 0.5 × SSC buffer solution was used as a running buffer solution for continuous washing the measuring flow cell of the SPR spectrometer and for preparation of all investigated samples.

A 2.5% GA in phosphate buffered saline (PBS) buffer solution was used to cross-link the APTES free amines on the sensor surface to the free amines on M13KO7 suspended in solution on the sensor surface.

Notably, the performance of all analyzers markedly improved when a buffer solution was used.

Since in this experiment no buffer solution is used, then the increased concentration of hypochlorite causes the pH to increase and a decrease of the chlorine concentration.

The buffer solution is used as a blank and automatically subtracted from the samples during scanning.

Briefly, a total of 1 L deionized water and 10 mL citrate buffer solution were used to rehabilitate antigen and washed with 0.01 M PBS (PH 7.4) twice per 3 min.

Twenty four milliliters of each of the following NaCl TDG buffer solutions was used as an elutant: 0.00, 0.05 (A), 0.10 (B) and 0.20 (C), 0.30 (D), 0.40 (E) and 0.6 (F) mol L−1.

pH 4.01 and pH 7.01 buffer solutions were used to calibrate the equipment prior to analysis.