Sentence examples for buffer solution prepared by from inspiring English sources

Culturable organisms were extracted from sediment samples using a sterile buffer solution prepared by dissolving 0.2% (w/v) sodium pyrophosphate in ultrapure water.

The final substrate solution (950  μL) was prepared by dropwise addition, under continuous vortexing, of 95  μL pNPP solution into 855  μL of buffer solution (prepared by dissolving 0.4 g of Triton X-100 and 0.1 g gum arabic in 90 mL of buffer).

Reactions were stopped by addition of 190 μl fresh TNBSA borate buffer solution prepared by adding 50 μl of 5% 2,4,6,-trinitrobenzene sulfonic acid (TNBSA; Pierce) to 10 ml of borate buffer with 0.5 g l−1Na2 S O3, pH 9.3.

The swelling ratio (SR) of the hydrogels was determined by immersing the dry hydrogels in buffer solutions (prepared from Na2HPO4 and NaH2PO4, pH = 7.2 7.4) at room temperature.

Clark and Lubs buffer solution was prepared by mixing 50 ml of 0.2 M aqueous solution of boric acid and potassium chloride (1 liter containing 12.368 g of boric acid and 14.90 g of potassium chloride) with 21.3 ml of 0.2 M sodium hydroxide in 200 ml standard flask [12], and adjusted by pH meter.

Buffer solution was prepared by dissolving 16 g/L NaCl in deionized (DI) water containing 100 mM of acetate buffer at pH 4.6.

An aqueous phosphate buffer solution was prepared by dissolving 2.000 g of potassium dihydrogen orthophosphate in approximately 400 mL of water.

To this end, a pH 7 buffer solution was prepared by mixing 1.2 g of NaH2PO4 and 0.885 g of Na2HPO4 in 1 L flask and filled to the mark with distilled water.

The 5.3 pH buffer solution was prepared by dissolving 21.5 g of sodium acetate and 2 mL of acetic acid in 300 mL, before being diluted up to 1 litre with DI water.

Buffer solution was prepared by dissolving 928.6 mg of anhydrous NaH2PO4 and 320.9 mg of anhydrous Na2HPO4 in 100 g of D2O and used without further pH correction.

Buffer solutions were prepared by adding NaOH solution of a predetermined concentration to phosphoric acid or acetic acid to obtain the desired ionic strength.