Sentence examples for bubbles to the solution from inspiring English sources

The enhancement in gas holdup increases the liquid gas interfacial area with a resultant increase in the rate of mass transfer of O3 from the gas bubbles to the solution (Kuo 1982; Konsowa 2003).

Finding combinations is more alchemic: many of them emerge as answers to riddles, which are best solved by staring at them blankly for several minutes, furrowing your brow, and stomping away until the solution finally bubbles to the surface of your brain.

For comparison, pure oxygen bubbles introduced to the solution with different reaction time (20 and 40 min) also were prepared, named as Fe@Fe3O4-20 Fe@Fe3O4-204-40, respectively.

After pure oxygen bubbles introduced to the solution for 30 min at the flow rate of 150 sccm, the Fe wire was taken out and immersed into 50 mL of distilled water for about 1 h and then dried in N2 environment.

NO gas, previously washed KOH (0.1 n) to eliminate nitrated NO derivatives, was allowed to bubble in the solution for 5 min. NO concentration was verified by reaction with a solution of oxyhaemoglobin in HEPES (100 m m, pH 7.4).

Finally, approximating explicit procedures are proposed for the computation of bubble growth rate without resorting to the solution of the boundary value problem.

The solution was stirred and degassed before H2 was allowed to bubble in the solution for 5 hr.

When the pH was close to 8.0, air was bubbled through the solution to allow an oxidation reaction.

Experiments were carried out in an especially designed glass vessel in which helium gas was continuously bubbled through the solution to create uniform concentration and to remove hydrogen gas from the surface for the case of hypophosphite-based procedure.

During alkaline water electrolysis, additional energy losses occur owing the presence of bubbles in the solution, particularly close to both the gas-evolving electrodes.

N2 was further bubbled through the solution to remove volatile reaction products from the mixture.