Sentence examples for bubble formation at the from inspiring English sources

Potential flow theory is used to describe bubble formation at the orifice.

The major thermal resistance occurring at the evaporator side is caused by the vapor bubble formation at the liquid-solid interface.

Thus, the reduction of the thermal resistance may be related with the influence of nanofluid on the bubble formation at the evaporator side of the DMHP.

Additionally, bubble formation at the electrodes and rf noise pickup has constrained the typical sample geometry to U-tube-like arrangements with a small filling factor and a low resulting NMR sensitivity.

This paper starts with the definition of cavitation, which is followed by a general presentation of bubble occurrence phenomena, and of the acoustic techniques that are suitable for monitoring and detection of bubble formation at the early stages of the boiling processes.

For pool boiling, the bubble dynamics are divided into five stages: (1) bubble formation at the bottom of the boiler wall, (2) bubble rising, (3) bubble coalescence, (4) splitting of bubbles, and (5) bubble burst at the free surface [4] [24].

Some researchers operate their system at room temperature or 30°C, as there is usually no bubble formation at these lower temperatures.

The main contributor of large bubbles formation at the monolith breaker exit is the bubbles׳ coalescence.

The study of bubble formation at micro-scale and especially in the presence of a lateral liquid flow field is still very limited.

To simulate the bubble formation at a single nozzle in a viscous medium having yield stress, the non-spherical bubble formation model was proposed.

The buffer polymer solution and suspension with nanotubes were vacuum-degassed prior to melting experiments to minimize the bubble formation at high temperatures.