Sentence examples for broadcasting the signals from inspiring English sources

The frequencies are chosen to avoid interference with other services, to minimize attenuation or delay as the signals penetrate the ionosphere, and to minimize the power needed by the satellite for broadcasting the signals.

The key concepts of placement are to design from the inside out, which means placing the AP at the center of the user base, while also trying to avoid broadcasting the signal out of the windows.

While HD Radio is still just getting off the ground, it's already possible to listen if you live within range of a station broadcasting the signal and have a radio receiver capable of getting the signal.

They discover the station broadcasting the signal, finding its workers killed and a strange box connected to the broadcast equipment.

Skaldak escapes from his armour - an act of great dishonour - and stops broadcasting the signal to the other Ice Warriors because he believes himself to be the only one of his kind left.

It has a grant from the U.K. Space Agency to have three small satellites made dedicated to broadcasting the Lantern signal.

Instead, the researchers worked out how to use two closely spaced antennas: one for receiving and the other for broadcasting the jamming signal.

Instead of broadcasting the radar signal across the entire forward hemisphere of the aircraft and listening to echoes from everywhere in that volume, this system would allow the radar to be used like a flashlight, pointed in the direction of observation.

After receiving the signals from both sources, the best relay selection is performed based on a predefined criterion, which results in that only a best relay is selected for NC-ing the received signals and broadcasting the NC-ed signal in BC phase.

The portable neurophysiological preparation was placed at a distance of 10 m from a speaker broadcasting the conspecific sound signal at a rate of 0.1/s, with an SPL adjusted to either 10 dB or 20 dB above the threshold of the preparation.

Finally, the relay decodes and encodes its received signals from node A and node B before broadcasting these signals to the two terminals in the third phase.