Sentence examples for breakthrough time increased the from inspiring English sources

An increase in macropore tortuosity progressively increased the breakthrough time, increased the apparent retardation coefficient (R′), decreased the depth to the center of mass of a given adsorbed tracer, and increased the anisotropy in tracer distribution profile.

Delay in breakthrough time increases the macroscopic efficiency and oil recovery consequently, as oil recovery in any displacement process depends on the volume of reservoir contacted by the injected fluid.

The breakthrough time increased with increasing in the bed depth, whereas inverse relationship was observed with the initial phosphorus concentration in the fixed bed studies.

Furthermore, the breakthrough time increased by about 35% and the saturation time reduced by about 17% in CMFB reactor for CO2 capture than that in FB reactor.

It was also observed that, the sorption capacity and breakthrough time increased with an increase in the bed height as shown in Table 5.

The breakthrough time increased from 9 to 30 h for CLR and 5 to 24 h for CR with increasing bed height from 10 to 30 cm.

Metal sorption capacity as well as breakthrough time increases with the increase of bed height increases because of increase in effective sites of the resin (Maiti et al. 2008).

For higher values of the influent pH, the breakthrough time increases, due to the greater metal uptake capacity at the equilibrium.

On the contrary, the breakthrough time increases with increasing biosorbent dose.

Figure 2 shows that with the increase of ZnCl2 mass fraction, the breakthrough time increases.

The water breakthrough time increases with increasing distance between gas well and edge water.