Sentence examples for breakthrough time for from inspiring English sources

However, there are short studies on the methods of predicting water breakthrough time for edge water gas reservoir.

As a result, the breakthrough time for O O treatments was much faster than any other continuity treatments.

An earlier breakthrough time for NO3− relative to the uncontaminated soil was observed and predicted by the transport model.

The contour plot in Fig. 15 shows the combined effect of flow rate and biosorbent dose on the breakthrough time for continuous biosorption of As III) by AiBP.

In this paper, we focus our attention on the derivation of a novel model for edge water breakthrough time for high-sulfur gas reservoirs.

Al-Afaleg and Ershaghi (1993) used an empirical correlation for homogenous reservoirs to calculate the critical production rate and breakthrough time for naturally fractured reservoirs.

This is exemplified by earlier breakthrough times for models that have greater average porosity.

The effluent breakthrough times for the thick-oil and thin-oil rim reservoirs were experimentally measured, approximately 140 and 63 s, respectively.

When the packed bed depth was increased from 5to2525 mm, the 50% breakthrough times for Hg and SO2 removal increased from 12 to 52 min and from 6 to 47 min, respectively.

Predicted breakthrough times for an SB vertical barrier amended with 2 10 wt.% AC increased by several orders of magnitude relative to the theoretical case of a nonreactive (non-adsorbing) barrier.

The high values for the breakthrough time obtained for the Cu II) ions represent a high removal efficiency and affinity with the biomass.