Sentence examples for break strength from inspiring English sources

Increasing the loading was, however, shown to lower break strength and enhance percentage elongation at break.

Higher residual unsaturation results in polyurethane films with increased break strength, Young's modulus, and toughness.

The output properties, i.e., peak strength, break strength, peak elongation, break elongation, etc. were modeled for multi factor optimization.

The tests conducted here established that aramid-fiber strength members are insensitive to tensile fatigue when the cyclic amplitude is a small fraction (2%) of the break strength.

The tensile tests revealed that the mechanical properties of PEOc-20, including break strength and elongation at break decrease only in a very small amount, while those of PEOc-40 are depressed obviously with phase separation time.

The strength degradation of aramid-fiber external braids was demonstrated to be quite sensitive to braid angle (in the range of 12 15°), and was relatively unaffected by both temperature and tension during cyclic bending fatigue, under low tension (1 5% of break strength) with D/d=40.

When stress exceeds breaking strength, a rock yields by rupture.

Fascial wound breaking strength exceeded dermal wound breaking strength at all time points (9.16 ± 2.17 vs 3.51 ± 0.49 N at 7 days, P <.05).

Unlike vegetable fibres, wool has a lower breaking strength when wet.

This result was normalized to the breaking strength of the fibers and compared with Kevlar.

Products with higher breaking strength were observed with increasing levels of WG and SPC.