Sentence examples for boxing profile from inspiring English sources

His boxing profile is as modest as the boxers he has worked with, among them Jesus Salud, a former junior featherweight champion; Antoine Byrd, a supermiddleweight, and King Ipitan, a heavyweight, with whom Mr. Boyd had a falling-out.

The dose for each implantation energy was chosen to obtain a BOX profile with carbon concentration in the range from 2 × 1017 to 1 × 1019 cm-3.

The ideal BOX profile structure simulated results showed that the thinner the low doping surface layer for deeply retrograde MOSFETs, the higher the VTH variability.

In order to form the box profile with a low number of defects, a high current MeV ion implanter was constructed using a newly designed continuously variable energy RFQ accelerator and high temperature ion implantation chamber.

Which is in marked contrast to the E-Class, where Mercedes has ditched conservatism for a more prominent three-box profile, squared off lines, angular, sharp creases, prominent shoulder lines, interesting wheel arch treatment from the '53 Ponton Benz and lots of bright-work.

Each promoter was scanned for its best match to an E-box profile and the 500 best-scoring matches were analyzed for their distribution among gene families (Table 1).

Two different pultrusion orientations were examined: flat panels with pultrusion directions either parallel (unidirectional orientation) or perpendicular (bidirectional orientation) to the box profiles.

The sandwich assemblies were built-up sections made from pultruded web-core box profiles incorporated between two flat panels, connected via adhesive bonding or novel blind bolts.

Hybrid construction elements were formed by placing concrete in plastic form inside GFRP box profiles and experimental tests were performed on the materials.

A unidirectional configuration consisting of an FRP slab with box-profiles parallel to flat panels exhibited shear-out failure, whereas a bidirectional orientation consisting of an FRP slab with box-profiles perpendicular to flat panels exhibited both shear-out and net-tension failure in the FRP component.

Built-up modular sections consisting of standard GFRP pultruded I or box profiles are incorporated between two GFRP plates to form a sandwich structure, which can then be assembled in the transverse direction to form a one-way spanning slab system.