Sentence examples for boundary layer wind speeds from inspiring English sources

Then, simultaneous observations of atmospheric boundary layer wind speeds were conducted by Doppler sodars at a "seaside" area and a "suburban" area.

In this study, the authors attempt to find a reasonable method for estimating design wind speed for a given terrain roughness, through simultaneous observations of atmospheric boundary layer wind speeds over two sites with different roughnesses using Doppler sodars.

The study investigates the aeroelastic model response to boundary layer wind loading under different wind speeds and configurations.

The wind tunnel tests were carried out in a low-speed boundary layer wind tunnel.

Displacements and accelerations of the aeroelastic model of the tower with and without lines under various wind speeds were investigated through boundary layer wind tunnel tests, and the maximum wind loads on, and wind-induced destroyed mode of, the tower-line model were also observed.

However, the wide ranges for the different downburst parameters and the varying representations of downburst wind speeds, which are different from boundary layer wind profiles, have complicated the investigation of transmission line failures under these types of loads.

The boundary layer wind tunnel (BLWT), which reproduces the increase of wind speed and the propagation of mechanically induced turbulence upwards from the ground, owes its development and validation to measurements of surface pressures, building motions, and other wind effects on full-scale structures.

The experiments were performed in a low velocity atmospheric boundary layer wind tunnel.

Earlier work has shown that the variation in the wind speed with height can easily be modelled using standard boundary layer wind tunnel techniques.

It estimated that "a staggering two-thirds" of these were analyzed and tested by Mr. Davenport's Boundary Layer Wind Tunnel Laboratory at Western Ontario.

Simulation results are compared to wind tunnel experiments conducted in a boundary layer wind tunnel.