Sentence examples for boundary layer thickness was from inspiring English sources

It was concluded that the boundary layer thickness was affected not only by the bulk flow parallel to the membrane surface, but also by the permeation flow perpendicular to the membrane surface.

The boundary layer thickness was obtained by smoke visualization and measured by image analysis in the range 2.4×104

According to the web speed, three laminar flow mechanisms were observed, for which the air boundary layer thickness was found to vary from 0.74 to 3.2 mm.

The boundary layer thickness was also found to decrease with an increase in the magnetic parameter.

The temperature profile and corresponding boundary layer thickness was depressed by uplifting the Prandtl number.

Further, an increase in the thermal boundary layer thickness and decrease in momentum boundary layer thickness was observed for the increasing values of the magnetic parameter.

Added to that, the effects of nonlinear growth of boundary layer thickness are rarely included in these models.

The fluid boundary layer thickness is rapidly reduced when either the frequency or the amplitude is increased.

The thermal gradients are high near the lower portion of left wall and near upper portion of right wall for Da⩾10−4 irrespective of φ and Pr and thus, thermal boundary layer thickness is small along those zones.

The results show that the concentration boundary layer thickness is very thin and the previous three-layer model can be further simplified.

Typical for MPPs is a Shear number of order unity, implying that the viscous boundary layer thickness is in the order of the perforation radius.