Sentence examples for boundary layer profiles are from inspiring English sources
The one-equation Spalart Allmaras (SA) turbulence model overpredicts eddy viscosity, and its boundary layer profiles are too full.
The boundary layer profiles were measured by using a two-dimensional Laser Doppler Velocimetry system.
The inlet boundary layer profile is measured with both hotwire probe and aerodynamic probe.
The boundary layer profile is found to have little influence on sound absorption.
A careful observation shows that the effect of (lambda_{1}) is more significant compared with (lambda_{2}), particularly with respect to the momentum boundary layer profiles.
Downburst and boundary layer amplification profiles were shown to become more similar as the topographic feature height was reduced with respect to the outflow depth.
The acceleration of flow under the marine current turbine changes seabed boundary layer profile.
The boundary layer wind profile is governed by the power law equation: Uleft( z right) = U_{infty } left( {frac{z}{{z_{0} }}} right)^{alpha }.
The roughness length of the simulations were determined using: (a) balance measured shear velocities; (b) shear velocities computed from X-wire Reynolds stress measurements; and (c) indirect procedures where accepted forms of turbulent boundary layer mean velocity profiles are fitted to the measured mean-velocity profiles.
The boundary layer velocity and temperature profiles are computed for different values of the physical parameters.
It depicts that the velocity field and momentum boundary layer thickness increase by increasing mixed convection parameter as shown in Fig. 4a. Figure 4b illustrates that the solutal concentration profile and its boundary layer thickness are a decreasing function of mixed convection parameter.
