Sentence examples for bottom zones of from inspiring English sources

The use of refrigerative dehumidifiers reduced the overall difference of humidity between the middle and bottom zones of a greenhouse, but the local distribution of humidity was uneven, especially close to the dehumidifiers.

Figure 21 shows the deposited hard coke contents over the top, middle, and bottom zones of the individual and composite catalysts.

This suggests that the middle and bottom zones of the catalyst bed contributed the most activity, where the reaction took place.

Figure 6 shows the TGA results of the average of the hard coke content deposited over the top, middle and bottom zones of the aged CBV712 USY catalyst bed after unloading the spent catalyst from the atmospheric glass reactor.

It can be clearly seen that the middle and bottom zones of 1 wt% Pt/Al-SBA-15 had the highest hard coke content in the catalyst bed, whereas there was slightly less coke in the top zone.

The axial bed voidage is less in the bottom zone of the riser column and is increasing along the height of the bed.

The different investigation methods are in a good agreement and indicate a core-annulus structure in the bottom zone of the CFB riser.

The solids concentration distribution in the bottom zone of a cold model CFB unit was measured with fiber-optical probes and by γ-ray absorption.

For the carbonator modeling, the Two-Fluid-Model (TFM) approach is combined with the advanced EMMS scheme in order to provide results with high accuracy, even for the difficult to model dense bottom zone of the riser.

The test results indicate that at the bottom zone of the filled soil layers with 96% degree of compaction, the 12% lignin stabilized silt exhibits superior mechanical performances (i.e., higher value of CBR and Ep, and lower values of resilient deflection (Hr) and DCP Index) than the 8% quicklime stabilized silt after 15 days of curing.

The FDTD simulation results demonstrated the better light utilization efficiency for the proposed novel mixed 2D/1D hierarchical structure and subsequently resulted in larger effective heterostructure interface area of photoanode which means the increased heterostructure interface area while maintaining evenly distributed light absorption especially at the bottom zone of 3D nanostructure.