Sentence examples for bottom thickness from inspiring English sources

Also, distortion of the bottom of the die-less clinched joint can be avoided by achieving a bottom thickness of at least 10% of the total sheet thickness.

We show that oxygen permeability into the microwell is tightly regulated by varying the poly-dimethylsiloxane (PDMS) bottom thickness of the concave microwells.

The effects of channel dimensions, channel wall thickness, bottom thickness and inlet velocity on the pressure drop, thermal resistance and the maximum allowable heat flux are presented.

Moreover, we validate the enhanced performance of the engineered microwell arrays by culturing non-proliferated primary rat pancreatic islet spheroids on varying bottom thickness from 10 μm to 1050 μm.

The results indicate that a narrow and deep channel with thin bottom thickness and relatively thin channel wall thickness results in improved heat transfer performance with a relatively high but acceptable pressure drop.

Figure 6 shows a photograph of the MSC-PA housed in aluminum chassis (side and top thickness 2 mm; bottom thickness 3 mm).

The top-to-bottom thickness of the low-oxygen zone in that region has expanded by 85% during that time, the team reports tomorrow in Science.

Targets with extra stiffness, on account of weld and larger bottom plate thickness, achieved complete defeat of the penetrator.

The obtained dielectric and ferroelectric properties changed according to the thermal stress which was influenced by the bottom electrode thickness.

The effects of battery radius, gap between neighboring batteries, heat generation rate, and top and bottom PCM thickness on the minimum mass of PCM are analyzed.

Parameter simulation results show that the optimal inner-to-outer radius ratio of the annular top plate ranges from 0.4 to 0.6 for a top and bottom plate thickness ratio of 0.5 1.5.