Sentence examples for bottom of the element from inspiring English sources

Roller supports, restraining the bottom of the element from moving in the load direction, were applied.

Joel Bullock from The Coaster Critic gave Tatsu a nine out of ten for its close to the ground approaches and intense pretzel loop at the bottom of the element.

This is almost always written as a number at the bottom of the element's "square" on the table, under its one or two letter chemical symbol.

Both elements use a modified right Cauchy-Green deformation tensor ¯¯¯C where five of its six components are linearly interpolated from values computed at the top and bottom surfaces of the element.

"We're going to have hearings to try and get to the bottom of the rogue element in the FBI which seems to think it's OK to go outside the FBI to try and affect the election," he said.

Larger droplets are separated as they enter the cyclone housing, while the smaller droplets are carried by the gas into the helicoidal path of the rotating element, where they are centrifuged towards the outer collecting walls and, due to a baffle, flow counter-currently to the gas and are drained out from the bottom of the helicoidal element.

These shear forces on the top and bottom of the web element produce a couple moment zdT (=zdC), which must be balanced by the moment of shear forces acting on the vertical faces mn and op.

Note that the horizontal strain ε x of the virtual plane element is zero because the dimensionless rigid beam elements at the top and bottom of the macro-element restrain the horizontal expansion due to shear.

However, the proposed macro-element cannot address the premature yielding of shear reinforcement since the dimensionless rigid beam elements restrain the tensile strain of shear reinforcement at the top and bottom of the macro-element.

But you'll see along both the top and bottom of the site elements that lead you to the more social aspects.

The elements developed for RC shear walls were improved for the modelling of URM piers by the addition of two shear springs at the top and bottom of the macro-element to account for bed joint sliding deformation in these regions.