Sentence examples for bottom faces of the from inspiring English sources

This theory satisfies zero transverse strains conditions at the top and bottom faces of the plate as a priori.

At first, it is shown the possibility to model plates subjected to tangential loads distributed on the top and bottom faces of the laminate.

For example, by selectively modifying the top and bottom faces of the satellite panicum mosaic virus capsid protein, new types of core/shell materials could be obtained after assembly.

An improved structural kinematics proposed earlier by author's is employed which accounts parabolic variations for the transverse shear strains with stress free boundary conditions at the top and bottom faces of the plate.

The element formulation is based on a refined higher order theory which satisfies the zero transverse shear stress boundary conditions on the top and bottom faces of the plate and requires no shear correction coefficients.

Figure 2e shows a 3D exterior visualisation of the Pd distribution, where we can see the Pd appears to agglomerate around the circumference, but to a lesser extent on the top and bottom faces of the pellet; in good agreement with previous studies on these samples33.

The bottom faces of these cavities were defined as two different regions that either supported or inhibited cell adhesion.

The absence of vent-hole on the bottom face of the packaging box caused non-uniform airflow and a highly heterogeneous cooling.

These shortcomings led to the development of ball grid array (BGA) package that has an array of pads presented across the bottom face of the device.

Controlled energy dissipation in the structure is realized through the use of steel links that are installed between the bottom face of the suspended slab and the floor beam underneath the slab.

Adding vent-holes (3.5% vent area) on the bottom face of the package reduced vertical airflow resistance, and reduced the seven-eighth cooling time by 37% compared to a package with no bottom vent-holes.