Sentence examples for bottom face of the from inspiring English sources

The bottom face of the membrane was coated with 1% gelatin.

The absence of vent-hole on the bottom face of the packaging box caused non-uniform airflow and a highly heterogeneous cooling.

These shortcomings led to the development of ball grid array (BGA) package that has an array of pads presented across the bottom face of the device.

However, the cyclic creep is shown to cause in bridges with medium and small spans (<80m) a significant residual tensile strain which can produce deleterious tensile cracking at top or bottom face of the girder.

Adding vent-holes (3.5% vent area) on the bottom face of the package reduced vertical airflow resistance, and reduced the seven-eighth cooling time by 37% compared to a package with no bottom vent-holes.

Controlled energy dissipation in the structure is realized through the use of steel links that are installed between the bottom face of the suspended slab and the floor beam underneath the slab.

This theory satisfies zero transverse strains conditions at the top and bottom faces of the plate as a priori.

Perfect matched layer (PML) boundary conditions were used at the top and bottom faces of the unit cell.

Both top and bottom faces of the core sample (approximately 6.0 mm diameter and 6.0 mm length) were diamond-polished.

At first, it is shown the possibility to model plates subjected to tangential loads distributed on the top and bottom faces of the laminate.

Two 1.5 mmT-type thermocouples were placed at the top and bottom faces of the stacks, acquiring temperatures every 10 s with a sensibility of 0.1 °C.