Sentence examples for both sample holders were from inspiring English sources

Both sample holders were placed at the focus of the ultrasonic transducer.

The designed polyetheretherketone sample holders were applied to fix the piezoelectric co-polymer films.

Sample holders were oriented at 45° to the unfocused incident beam.

The sample holders were then placed at a 45° angle to the incident X-ray beam.

The sample holders were in accordance with standard EN ISO 12945 2 (diameter 90 mm).

For the SEM study, the sample holders were cleaned and then dried with acetone solvent.

Two sample holders were designed and fabricated for applying a shear stress to the boundary in bicrystals of various geometries.

Special sample holders were designed and fabricated to facilitate measurements using a commercial spectrophotometer with integrating sphere attachment.

All the tools used to mount the samples on sample holders were cleaned with an ethanol ultrasonic bath.

After digestion, the Teflon sample holders were heated on a sand bath at ~95 °C until acid was nearly evaporated.

The sample holders were placed in an Edward's gold sputter-coater, which covered the sample surface with a thin layer of gold.