Sentence examples for both finite element simulation from inspiring English sources

Both finite element simulation and experiment investigations were carried out to verify the proposed method.

Helbawi et al. [45] found that the maximum stress position shifted away from the bonded-interfaces in both finite element simulation and indentation experiments.

Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.

Both finite element simulations and laboratory experiments were applied to validate the current least-squares method with acceptable accuracy, if the even terms of the Irwin's equation are removed.

Both finite element simulations and impact experiment demonstrated that without boundary constraints or fasteners between tubes, the proposed self-locked energy-absorbing system can still effectively attenuate impact loads while the round tube systems fail to carry load due to the lateral splashing of tubes.

It is found that, for both the finite element simulation and the theoretical analysis, when subjected to half-sine acceleration shock, the peak relative displacement occurs at a critical frequency ratio (i.e.β="ω/ωn≈0.6), where ω and ωn are the characteristic frequency of the pulse loading and the first natural frequency of the system.

The results, from both the numerical finite element simulation and experimental test, indicate that the soft-thresholding process is capable of effectively reducing the effect of noise, convincingly improving the sensitivity of damage identification, and discriminating relatively small damage.

The purpose of the current study was to look at the effects of cam-type impingement on the generation of shear strains at the bone/cartilage interface, using both experimental and finite element simulation methods.

Here we report the transverse impact behavior of a new kind of 3-D multi-structured knitted composite both in experimental and finite element simulation.

This study also investigated the evolution of a surface deformation profile using both centrifuge experiments and the finite element simulation.

The steady-state temperature distribution for various load cases and the resulting stress and strain within the assembly have both been computed using a finite element simulation.