Sentence examples for both coatings from inspiring English sources

The AlTiN coating suffered more severe abrasive wear compared to the AlCrN coating, although both coatings had similar hardnesses.

However, with the lower amount of solids in coating B and since both coatings were picked up by the substrate to the same extent, the actual amount of PEDOT PSS per square meter (A: 0.53 g/m2 and B: 0.66 g/m2) is about the same for both coatings.

In addition, there is a tendency to cracking both coatings with an increase in the coating thickness of more than 10 μm (Fig. 5b, d).

The growth of the oxide scales was reduced by both coatings, and most effectively by the LSC coating.

Both coatings act as solid lubricants, providing protection for both the coated surface and any opposing uncoated surface.

The mechanical properties of both coatings were also evaluated.

Both coatings protect the underlying Superfer 800H.

Both coatings exhibited broadly similar mechanisms of deformation.

Oxidation is the main wear mechanism for both coatings.

Corrosion pits were observed after the tests on both coatings.

Spallation was observed in both coatings at higher impact loads.