Sentence examples for both cases the maximum from inspiring English sources

In both cases, the maximum order of differentiation of each output appearing in the model inversion constitutes relevant information since it characterizes the regularity of the trajectory to be followed.

A device loss of <8 dB is predicted for a MISIM structure with a 25 nm thick silicon layer, for which the device length is <3 μm, and <5 dB loss is predicted for the limiting case of a 5 nm thick silicon layer in a 1.2 μm long device: in both cases, the maximum operating voltage is 7.5 V.

The results of the two optimum Neyman-Pearson detectors for the uniform DFT and the MDFT filter bank present similar performance since in both cases the maximum possible amount of information is used.

In both cases the maximum concentration would be 10-10-10-11 M HCN in an environment buffered by the fayalite-magnetite-quartz (FMQ) mineral buffer assemblage at temperatures of 250-400°C 250-400°C

The BMD estimates for TSH were infinite, because in both cases the maximum likelihood estimate of the parameter β was zero.

In both cases, the maximum haul distance is great enough that biomass could be retrieved from all available regions of San Juan National Forest.

The denominator is the same for both cases since the maximum possible sum of weighted links equals the maximum possible number of links (since the maximum link weight equals 1.0).

However, the differences between the two oils are small since, in both cases, the value of the maximum stress on retina is almost equal to the maximum possible asymptotic value.

These latter were performed using a previously describe demographic model [ 34] as above and significant results were obtained for both EU and AS (Tab. 2); in both cases the test of maximum cell value [ 53] indicated AVPR1B Ex2 as an outlier (p = 0.018 and 0.001 for EU and AS, respectively).

In both cases the farmer requires the maximum return from his investment in time, materials, equipment and buildings.

In both cases the location of the maximum has to be determined at forehand, either by setting the source of auxin at the location of the QC or by forming at this location a dead end.