Sentence examples for both a high machining from inspiring English sources

This machining process achieves both a high machining speed and good surface finish.

A high machine loop stiffness, 12.14 N/μm, is required in order to prevent the machining chatter and to minimize the geometric error of the component.

Over 78% of the mapped reads included at least one mismatch and 22% of the mapped reads have four or five mismatches in their best alignment to the reference, indicative of a high machine error rate.

A higher machining power increased the grinding temperature; but both the microstructure investigation and the FWHM results showed that the deformation of the surface and the sub-surface layer are similar at different used machining powers.

Thus, an increasing thermal effect can be considered as the main factor that introduces higher tensile residual stresses, both parallel and perpendicular to the grinding directions when grinding at a higher machining power.

A higher machining power increases the grinding temperature, while the grinding lubrication has an effective cooling effect.

In high-speed machining of the dies and molds characterized by large-scale and deep cavity, the offline error compensation method proposed in this work can obtain a higher machining dimensional accuracy and surface quality without sacrificing machining efficiency.

Cross-section microstructure investigations indicate that a coarser grit size, a higher machining power and grinding without lubrication introduce higher plastic deformation in the ground surface.

The following conclusions can be drawn: A higher machining power results in a larger normal grinding force; while using grinding lubrication reduces the normal force.

Grinding with a higher machine power significantly increased the surface temperature.

Meanwhile, a higher machine power means a higher downward force, therefore, instead of being cut, surface material was pressed down and slid along the grinding direction.