Sentence examples for bonding layer between the from inspiring English sources

Because the epoxy resin acted as bonding layer between the R974 nanoparticles film and the glass slide, a combination of high bonding strength and superhydrophobicity was achieved.

The ultimate failure of the biomimetic integrated honeycomb without a bonding layer between the panel core layers is determined by the material strength itself; therefore, the honeycomb possesses good mechanical properties.

Asymmetries introduced during the fabrication process reduce the efficiency of the transducer, and degradation of the bonding layer between the end-caps and the electroactive material can alter the vibration response and ultimately lead to failure.

Excellent adhesion of DLC film to the steel surface is achieved using a variety of surface modification techniques such as in-situ inert ion sputter cleaning and ion implantation or deposition of an intermediate bonding layer between the DLC film and the substrate.

Two types of connections between the precast permanent form and the core material are investigated namely; adhesive bonding layer between the two surfaces, and mechanical shear connectors.

Two types of shear connections between the precast permanent reinforced mortar form and the core material were investigated namely; adhesive bonding layer between the two surfaces, and mechanical shear connectors.

However, the bonding layer existing between the interconnect and the ceramic cell increases mass transfer resistance, resulting in decreased performance.

In the electro-mechanical impedance (EMI) technique, which is based on induced strain actuation through piezoelectric ceramic (PZT) patch, the knowledge of shear stress distribution in the adhesive bond layer between the patch and the host structure is very pertinent for reliable health monitoring of structures.

The failure of cement treated demolition waste originates either in the bonding layer between aggregates and matrix or through some low-quality masonry particles along the loading direction.

The effects of processing parameters on the bonding layer structure between the cemented carbide substrate and the Al2O3 coating were investigated by depositing thick bonding layers under commercial production conditions.

Improved bond equations for the study of elastodynamic behaviour of thin bonding layers between two elastic media have been devised.