Sentence examples for bonding interface between the from inspiring English sources
Coating layer of gold is modeled as uniformly distributed mass over the surface of the moving gate, ignoring additional stiffness from bonding interface between the two materials.
It is found that the key to ensure the safety of RAB under blasting vibration is to prevent the split of the bonding interface between the RAB and a vertical rock wall, and to control the horizontal peak particle velocity (PPV).
However, to the best knowledge of the authors, there are no studies covering the bond behaviour of the stainless steel bonded to concrete and therefore, the present work aims to present an experimental study in which the bonded interface between the stainless steel and the concrete is tested with different bond lengths.
They possess high flexural strength, fracture toughness and hardness due to few defects, lamellar microstructure and well bonded interfaces between the metal and ceramic phase, with the highest strength and toughness of 931.3 MPa and 18.8 MPa m1/2 respectively in the direction parallel to the freezing direction.
A very dense microstructure and closely bonded interface between aggregate and the matrix was observed.
The main objective is to address the durability and thus the expected operational life of the repair, with emphasis on the adhesive bonded interface between metal and composite.
The formation of chemically bonded interfaces between SnO2 and SrNb2O6 particles makes the interparticle charge transfer more spatially available and smoother, which is significant to enhance the photocatalytic activity.
Textile reinforced concrete (TRC) is a novel composite building material, its structural behavior is substantially influenced by the bond interface between the reinforcing textile fabrics and concrete.
The results indicated that the critical debonding stress, that initiates fully debond at a bond interface between the SMA wire and matrix increased with increasing the externally applied current, and thus changing the phase condition in the wire.
As a result of dissolving the very thin Pd layer into the ball, Pd is almost undetectable along the entire bond interface between the ball and the Al pad.
