Sentence examples for bonding area from inspiring English sources

After tests, the microstructural evolution of the bonding area and mechanical properties of the bonded pieces were investigated.

An example where the bonding area was changed from 3.1 to 1.1 mm diameter is shown.

The results showed that a good metallurgical combination was found at the bonding area between the coating and the substrate.

At the compaction stage, blends with Methocel CR showed better tabletability driven by a higher compressibility as the smaller CR particles have a higher bonding area.

It was observed that generally a larger bonding area as a result of higher heat input leads to an increased mechanical performance of the joints.

The tool penetration depth, the stir zone (SZ) depth and the bonding area at the interface of two sheets increased with increasing dwell time.

The micro and nano lithography and bonding areas are intensely controlled environments to permit lithography and bonding with less than 1 defect per square centimeter.

Results from tensile tests performed in joints with different bonding areas are compared with model prediction showing a good agreement.

Complex interactions between mechanical and hygro-expansive properties take place in the bonding areas, affecting the overall material response.

For several fuel samples, intact pellet-cladding bonding areas on the high burnup sides of the pellets at high burnup above ∼70 MWd/kgU were observed.

Results from experiments performed in ASTM 1020 steel tee joints with different bonding areas are compared with model prediction showing a good agreement.