In addition to the bolted connection between the deck and stringers developed for the design, an adhesively bonded condition is also being considered and tested.
Thus, the contact between the anode electrode and the electrolyte, and between the cathode electrode and the electrolyte, would be the perfectly bonded condition.
In such process the heat source is given by the frictional forces work decaying into heat determining a local softening of the material and eventually bonding conditions.
NPs will firmly bond to the wall once in contact with it, and thus, bonding condition is dominated by diffusive process and independent of shear flow.
On the other hand, the results of bonded thinned Si-polymer cap display the bonding interfaces which have acceptable enhancement under the bonding condition less than 250°C.
The constitutive model depicts the strong dependency of interface behavior on bonding condition of the interface, bonded or unbonded.
Seven pure compression tests and eleven flexural tests were carried out to investigate the effect of tube size, bonding condition, post-tensioning, and supporting conditions.
Primary attention is focused on the influence of bonding condition at the liner/soil interface, formation material type, and load velocity on the system's dynamic response.
Furthermore, because of SU-8 polymer with lower temperature bonding condition, the thinned Si-polymer cap can achieve sealing process easily with a low temperature process, compared with traditional structures.
Bonded care conditions summarised the state and capacity of family and other close neighbour relations of support for end of life care.
Under certain bonding conditions, adjacent atoms will form multiple bonds with each other.
