Sentence examples for bond interface of the from inspiring English sources
The result indicates that most weld interface is the wavy metallurgical bond interface of the direct transition of Cu/SS but "coronary" vortexes containing metallic oxide exist on both sides of the crest.
A leak developed in the test vessel with an niobium interlayer after repeated thermal-shock cycles, which was attributed to an extensive crack network that formed in an interfacial layer of a niobium-rich constituent phase located on the bond interfaces of the niobium interlayer; the test vessel with a titanium interlayer did not develop a leak under the conditions tested.
The failures occurred at the leg attachments or the W monoblocks, rather than the bonding interface of the W monoblocks to the leg attachment.
To analyze the distribution of stresses at the bond interface of Molloplast-B soft-liner attached to PMMA acrylic surface of different geometries (smooth and rough) and at different load-application distances by 3D-FEA modeling of typical shear-bond test.
The carbide layers which were formed in the bond interface of an explosively welded tantalum steel composite after heat treatment between 1053 and 1273 K were examined metallographically and analyzed using an electron microprobe technique.
Several prior studies have reported formation of small voids between the bonding interfaces of the CuDB that can lead to crack initiation, propagation and thereby delamination of the entire interface.
From the scanning results, when 0.5% VMA is added, the fracture induced by the applied bending loads propagates along the weak bonding face, as the CT image shown in Fig. 10(a), which proves a negative impact of the bonding interface on the mechanical property of the laminated structure.
(left) The bonding interface of Cu/Sn layer with thermal process investigation and (right) the bonding interface of SU-8 polymer with thermal process investigation.
The purpose of this study was to compare the shear bond strength and adhesive remnant index (ARI) at the enamel-bonding interface of precoated and conventionally bonded brackets, utilizing standardized procedures.
In this study we investigate the effect of imperfect (not perfectly bonded) interfaces on the stiffness and strength of hierarchical polycrystalline materials.
We also examined the bonding interface regions of the specimens pretreated by poly DMA-MEA).
