Your English writing platform
Discover LudwigExact(10)
The maximum error for each method which is the maximum difference between the actual measured boiler temperature profile and the estimated boiler temperature profile is estimated.
The control objective is to hold the zone temperatures and the boiler temperature close to their respective setpoints irrespective of the changes in disturbances acting on the system.
In the base cycle, COP depends mostly on the boiler pressure, while in the modified cycle with the recuperator, the cycle efficiency depends mostly on the boiler temperature.
It is shown that the adaptive controller is able to adapt to a wide range of operating conditions and is able to maintain the zone temperatures and the boiler temperature close to their respective setpoints.
The results show that although 4-zone model can estimate the boiler temperature distribution with good accuracy, however the 10-zone and 32-zone models give smoother temperature distributions.
Two types of boiler temperature set-point strategies, one based on average outdoor air temperature method and the other using a fuzzy augmented system, were explored and their performance was compared.
Similar(50)
It takes 10 or 12 hours to get the pulverizers going and the boiler temperatures up.
The two ejectors were experimentally tested for boiler temperatures below 120 °C and an evaporator temperature below 15 °C.
With higher rank coals at boiler temperatures, the full NOx chemistry involving ammonia and hydrocarbon reburn gave the best results.
Reported mill boiler temperatures discrepancies and the physical characteristics of the ash, highlight the importance of accurate temperature monitoring at the combustion seat if bagasse ash quality is to be prioritised to ensure a usable final ash product.
It was found that the steam jet refrigeration system can operate with stability at low boiler temperatures of around 90 °C and supersonic ejector can enhance the performance of the refrigeration system by eliminating the shock from the ejector.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com